Browse all practice questions for the West Virginia Foreman Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

West Virginia Foreman Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the minimum distance required for all power lines constructed over haul roads?
  • What safety precaution shall be observed where track is on a steep grade?
  • What is the allowable ambient concentration of CO in the mine atmosphere under West Virginia law?
  • Why is low oxygen content necessary before opening a fire seal?
  • What is the weight of 1 cubic foot of Carbon Monoxide at 60 deg F and 30.00 inches Hg pressure?
  • What is the maximum allowable depth of a drill hole?
  • What effect does coal dust in the atmosphere have upon the explosibility of methane?
  • What is a fail-safe ground monitor?
  • What effect do constrained airways have upon velocity, when the volume remains the same?
  • Will diffused gases separate from a mixture because of their weight difference?
  • What must be provided at coal mining sections producing over 300 tons of coal per shift?
  • Is Hydrogen sulfide (H2S) considered poisonous?
  • Where should trolley wire be positioned in relation to the rail?
  • What materials are prohibited in or around powder magazines?
  • What is the specific gravity (SG) of sulfur dioxide?
  • What is the consequence of prolonged exposure to 5% Carbon Dioxide levels?
  • Which precaution is essential when installing a siphon?
  • How many feet outby the longwall face must first aid equipment be maintained?
  • How may rectifiers be ventilated?
  • What is one key characteristic of sulfur dioxide?
  • Who must a person request a conference in writing from after receiving a notice of assessment?
  • Why is sulfur undesirable in coal?
  • What material is often used to shield underground high voltage cables?
  • What must be done after supplies are transported using belts prior to transporting miners?
  • At each permanent underground oil storage station, what is the fire extinguisher requirement?
  • What must an examiner leave as evidence that the exam was completed?
  • What is Nitrogen mainly characterized as?
  • What is a working face in a coal mine?
  • What could a fluctuating high CO concentration in a sealed fire area indicate?
  • How is natural ventilation produced in mines?
  • Which signifies the proper protection for locomotives against elements on track entries?
  • What is the largest size particle of coal dust that can initiate an explosion?
  • What precaution should be taken when persons are coming off shift from recovery operations?
  • Is back-poling permitted?
  • What is the purpose of having reflective material on lifelines?
  • What chemical change does oxygen undergo to support life?
  • What does "attending diesel equipment" refer to?
  • What does "direct supervision" entail for an apprentice electrician?
  • Which of the following gases is tasteless, odorless, and colorless?
  • Which signal should a rescue team member respond to in the case of needing to stop?
  • How is sulfur dioxide (SO2) formed in a mining environment?
  • What is the maximum delay interval between adjacent rows of shots using millisecond delay detonators?
  • Can a skid mounted fuel tank be used for transportation of diesel?
  • What changes occur in the mine atmosphere sealed within a fire area?
  • Where should a self rescuer be positioned in relation to a miner?
  • What action must be taken when the primary escapeway is blocked with water?
  • What effect does barometric pressure have upon a sealed fire area?
  • How long should the ITX function with a fully charged battery pack?
  • What is the minimum distance permitted between shaft and slope openings?
  • From what side shall cars not be coupled?
  • What work is permissible in the face areas while boreholes are being charged?
  • What effect do constrained airways have upon velocity, when the ventilation pressure remains constant?
  • What amount of coal dust is sufficient to propagate a coal dust explosion?
  • What device is crucial to enhance safety on self-propelled track units?
  • At what percent of oxygen will a person start to breathe faster and deeper?
  • What percent of Carbon Dioxide is typically exhaled by the human body?
  • How shall explosives and firing devices be stored underground?
  • What is the specific gravity of Methane?
  • How would an air analysis indicate that a fire was extinguished?
  • What is the maximum distance mines may be developed underground before requiring a mechanically operated fan?
  • What is nitrogen dioxide (NO2)?
  • What is the maximum amount of explosives that can be stored underground in magazines?
  • What should be done at the bottom of each regularly traveled slope or shaft?
  • What are the dangers associated with signal equipment and circuits?
  • What additional requirement is stipulated at each underground oil storage station besides fire extinguishers?
  • How many feet of plant material can be found for each foot of coal seam?
  • At trolley wire splices, where should trolley hangers be installed?
  • Which three gases are detected by the LTX 310?
  • What fire protection is required at wooden doors through which power lines pass?
  • How is a malfunction indicated by the CSE 102 detector?
  • What is afterdamp?
  • When should a cutting machine not be moved?
  • What is the maximum charge of permissible explosive allowed for a hole 6' or more in depth?
  • What should happen in the event of an accident to the ventilation fan?
  • What is necessary for the effective operation of a foam generating machine?
  • How much air should be delivered to the LOC when places are driven up 200' without a free airflow connection?
  • What is required in the hydraulic jacks of all ATRS systems to ensure functionality?
  • Which aspect is NOT a requirement for lifeline cords in a mining environment?
  • What is the minimum distance required between shaft openings?
  • According to regulations, how tight should roof bolts be installed?
  • What is the comparative effect upon oxygen between a raging fire and a smoldering fire?
  • What ensures the safe coupling of cars?
  • What type of fire protection is needed during cutting, welding, or soldering operations?
  • What preparatory work is necessary before unsealing a fire area?
  • What is required for locomotives and self-propelled personnel carriers in mining operations?
  • What is the maximum number of persons permitted to work on a single current of air?
  • What is the first thing to be done on the surface in the event of an explosion?
  • What is the danger of reversing the air current in the event of a mine fire?
  • How often should directional indicators be placed on lifeline cords?
  • How does the body receive oxygen?
  • What does BTU stand for in relation to coal?
  • Which factors determine mine resistance?
  • What are the principal causes of mine explosions?
  • What percent of Methane is necessary for maximum explosive violence?
  • How can mine fans be made reversible?
  • What is the potential consequence of having too much methane present when firing explosives?
  • What is the minimum distance that underground powder magazines can be placed from a roadway?
  • What is a recommended practice for handling explosives underground?
  • How should a mine fire be approached?
  • What action should be taken if a distress signal is received through the lifeline?
  • What particular danger is present if ventilation is restored following an explosion, before an exploration is made?
  • What items are required in storage caches located within 500 feet from the working face?
  • How can excessive internal pressure be relieved from a sealed area without allowing air to enter?
  • What percentage of Carbon Monoxide will produce symptoms in several hours?
  • What does each inch difference in water column level represent in pressure?
  • How does the action of a mine fire cause explosive gases to be formed?
  • What is the minimum requirement for fire protection at temporary electrical installations?
  • What check must be made prior to each day's use of a Solaris?
  • What does natural ventilation refer to?
  • What is essential for maintaining safety on conveyor systems?
  • What is the required height for high voltage power lines above surface work areas?
  • What is the appropriate placement and operation for auxiliary fans?
  • Where shall "Danger High Voltage" signs be posted?
  • What is blackdamp?
  • What defines the tension of a roof bolt?
  • How is total mine pressure calculated?
  • What is the minimum clearance required on the trolley side?
  • What precautions are required when performing welding and cutting?
  • What is the maximum distance that a miner should travel without an extra cache?
  • What is the effect of increasing airway area on velocity, assuming volume is constant?
  • What is the required distance power magazines must be located from the mine opening?
  • At what percentage of methane is there a danger when firing permissible explosives?
  • How much operation time remains when the Solaris low battery alarm sounds?
  • What percentage of Carbon Monoxide will produce a tendency to stagger in 1-1.5 hours?
  • When should the initials of a certified foreman be recorded?
  • In terms of safety, where is the best position for trolley wire regarding worker proximity?
  • What is the minimum permitted distance between slope and drift openings?
  • If a locomotive is not coupled to the trip ahead, what distance should be maintained between them?
  • What is the proper method for performing the electrical zero test on the CSE 102 detector?
  • What is a potential consequence of not checking individuals out of the mine after recovery?
  • What is the minimum clearance to the roof for miners to ride belts?
  • What is the lowest ignition temperature of Carbon Monoxide?
  • What is the maximum concentration of DPM allowed under West Virginia law?
  • What does the term "electrical work" refer to in the context of coal mine equipment?
  • What should be taken into account when evaluating air quality in a mine?
  • What type of blasting cable is considered proper?
  • In what direction should doors swing to ensure they close properly in a mine?
  • Why is it not advisable to unseal a fire shortly after carbon monoxide has disappeared?
  • What type of signal must be prepared by the fire boss at the mine entrance at the beginning of a shift?
  • What is one method for removing a misfire?
  • What is electrolysis?
  • What is the reason for prohibiting back-poling?
  • How does incombustible stemming affect the flame of an explosive?
  • How far must powder boxes or magazines be kept from the blasted face?
  • What percentage of Carbon Monoxide will produce unconsciousness in 30 minutes?
  • Which compound is a product of complete combustion?
  • What is the penalty for failure to notify the Hotline?
  • When using a lifeline, what does three pulls signify?
  • What happens if an obstruction is present in a pipe being heated?
  • What is the penalty for creating an incorrect map or providing false statements?
  • All self-propelled track haulage shall be equipped with what?
  • What is the primary hazard associated with hydrogen sulfide (H2S)?
  • What evidence should be left after an examination by a certified mine foreman/fire boss?
  • What is the maximum distance allowed between shelter holes?
  • What must be provided at each permanent electrical installation?
  • What is the maximum distance a mine rescue team should explore under favorable conditions when lives are at stake?
  • How does mine resistance vary in relation to the velocity?
  • What is the first check to be performed on the CSE 102 Methane detector?
  • What shall all belt conveyors be inspected for daily?
  • Are additional cache storages required outside the working section?
  • What kind of work is excluded from the definition of "electrical work" in coal mines?
  • What is the maximum CO2 content allowed in air delivered to working places?
  • What signaling device shall be provided on locomotives and shuttle cars?
  • What dangerous gas may be formed when water is applied to a mine fire?
  • What is the lifeline signal to indicate "all right" when the person is at rest?
  • What is the lowest ignition temperature of Hydrogen sulfide (H2S)?
  • What advantage does rock dust have compared to water in extinguishing mine fires?
  • How must permissible explosives be stemmed to remain permissible?
  • How do you signal to advance using the lifeline?
  • To ensure it remains permissible, what is required for firing a permissible explosive?
  • How long can the ITX function when using the ISP sampling pump for continuous operation?
  • What is the maximum delay allowed for a series delay in any one round?
  • What are the two types of pumps commonly used in coal mines?
  • What is the specific gravity (SG) of Hydrogen?
  • What is the arbitrary waiting period after temporary seals are erected before rescue teams can return?
  • In the event of a fire located on the intake, how should miners be protected from smoke?
  • What percentages of methane in a methane air mixture, when burned or exploded, will produce relatively large amounts of Carbon Monoxide?
  • What is whitedamp?
  • What precaution should be taken during a mine fire in a gassy section?
  • What must be done if an auxiliary fan fails or stops?
  • What are the principal heat-producing ingredients of coal?
  • Who should receive a copy of the mine emergency shelter plan?
  • What is the alarm level activation setting for CO on the LTX 310?
  • Under what condition should power to an auxiliary fan be switched off?
  • What is the minimum charge of permissible explosive allowed for a hole 6' or more in depth?
  • How far apart should members of a mine rescue team travel?
  • What is required on haulage roads between the end car of trips placed on sidetracks and moving traffic?
  • What is a kettle bottom?
  • Why is it critical for roof bolts to be installed according to RCP specifications?
  • What percentage of nitrogen dioxide (NO2) is considered fatal?
  • How long should a person wait after a misfire before going back into a place?
  • What constitutes the "work area" for an apprentice electrician?
  • Who is tasked with providing conspicuous lighting for motor/trips?
  • What distance is identified as safe between locomotives and trips?
  • How many net tons are estimated to be in a foot acre of coal?
  • Why is there no explosion when the percentage of Methane exceeds 15%?
  • What is the required visibility range of emergency equipment in a coal mine environment?
  • Why should individuals be kept at the FAB after rescue until they are partially recuperated?
  • How is "work area" defined for an apprentice electrician working under supervision?
  • How shall telephone lines be installed?
  • What is the acceptable distance for starting boreholes from any uninspected abandoned workings?
  • What is the explosive range of Hydrogen?
  • On belts that do not transport miners, at what intervals are stop/start controls required to be placed?
  • What is the typical behavior of Methane in an atmosphere with insufficient oxygen?
  • Under what conditions is it inadvisable to explore ahead of fresh air?
  • What percentages of methane in a methane air mixture, when burned or exploded, will produce relatively large amounts of Carbon Dioxide?
  • What happens to oxygen availability when Methane levels exceed 15%?
  • What creates the force when an explosion is fired?
  • What type of items must be included in an escape kit located in storage caches?
  • Which four gases does the M40M monitor?
  • How does Carbon Monoxide cause injury to life?
  • Who sets the due date for payment of a notice of assessment?
  • What is the most violent explosive point of Hydrogen sulfide (H2S)?
  • What effect does an oxygen enriched atmosphere have on combustible gas readings?
  • What is the maximum temperature that external surfaces on diesel equipment should not exceed?
  • What measures can be taken if unexploded charges are suspected?
  • What is the minimum requirement for first aid training for coal mine employees?
  • What is a siphon primarily used for in operation?
  • What is the required size of rock dust particles?
  • How can the danger of an explosion be minimized while sealing a fire area?
  • Why is proper clearance important when loading or unloading from conveyor belts?
  • How far from the barricade should precautionary measures to prevent gases be implemented?
  • What should water lines be capable of delivering?
  • What is a precaution to take when heating pipe?
  • What is the explosive range of Hydrogen sulfide (H2S)?
  • What is the first step to take when a misfire occurs?
  • What effect do oxygen deficient atmospheres have on combustible gas readings?
  • What is the barometer reading that indicates normal air pressure at sea level?
  • How do silicone compound vapors affect the combustible gas sensor readings?
  • How many sheathed explosives may be fired at once?
  • When should boreholes be started near abandoned workings?
  • Which conditions of mine air can be measured using specific devices?
  • What is a common origin of Hydrogen sulfide (H2S)?
  • What is the specific gravity (SG) of West Virginia coals?
  • Which statement best describes a working section in a coal mine?
  • What is the lowest ignition temperature of Hydrogen?
  • What method can prevent gases from an explosion from reaching the barricade?
  • Is sulfur dioxide (SO2) classified as combustible?
  • What characteristic of the flame determines the permissibility of an explosive?
  • What must individual conductors of an underground high voltage cable be provided with?
  • What is the required distance telephone wires must be maintained from other power wires?
  • How often must each coal mine employee take refresher first aid training?
  • What is the most harmful gas found in afterdamp?
  • What is the requirement for fire extinguishers at working sections producing more than 300 tons of coal per shift?
  • What shall the bursting pressure of a fire hose be in relation to the static water line pressure?
  • What is the minimum size for shelter holes according to safety regulations?
  • How many portable fire extinguishers are necessary for each permanent electrical installation?
  • How is the term "direct supervision" characterized in regard to safety?
  • Which gas is typically associated with increased lung ventilation when its levels rise?
  • How can the incombustible content of rock dust be determined after application?
  • What plays a crucial role in determining the efficiency of mine ventilation?
  • What is the primary purpose of ventilation in mining?
  • Where should a blasting cap be positioned when a bore hole is charged?
  • Welding and cutting may be done in mines if what condition is met?
  • Who is responsible for ensuring a conspicuous light is placed on the front and rear of trips?
  • How is the battery voltage test performed on the CSE 102 detector?
  • What is the term for the resistance faced by air in a mining airway?
  • What should be done to provide clearance and avoid accidental contact with power lines when moving equipment?
  • How close to a mantrip may a powder trip be operated?
  • What percent of H2S becomes dangerous within 30 minutes?
  • How many air courses are required to have two-way communication?
  • At what oxygen level is it advisable to attempt to open a fire seal?
  • Why is it important to keep drill holes at a specified depth?
  • What is Firedamp?
  • What is the specific gravity of Carbon Dioxide (CO2)?
  • How many fire extinguishers and what additional materials are needed at temporary electrical installations?
  • What role do signaling devices play in safe locomotion?
  • How does reduced oxygen content in the atmosphere affect Methane explosibility?
  • How does an increase in Carbon Dioxide levels affect lung ventilation?
  • Why is a centrifugal pump unsuitable for gathering service?
  • Where must first aid equipment be maintained for coal mine operators?
  • What is the specific gravity of Nitrogen?
  • What is the specific gravity (SG) of Hydrogen sulfide (H2S)?
  • What should not be used as man trips?
  • If a pusher locomotive is not used on a trip, what is required?
  • What should be done to maintain safety when storing explosives?
  • How is Hydrogen typically detected?
  • How should posts be installed in a pitched location?
  • According to West Virginia state law, when must the LTX 310 oxygen level be calibrated?
  • What shall be the minimum dimensions of man doors?
  • What is the average weight of loose coal in pounds per cubic foot?
  • Where should intrinsically safe, battery-powered strobe lights be attached?
  • What is the procedure when a sealed fire is recovered by direct ventilation?
  • What is the principal danger while sealing mine fires?
  • What is the maximum speed of belts which transport miners?
  • What is the maximum allowable percentage of silica in rock dust?
  • For locations storing 25 gallons or more of oil, how many fire extinguishers are mandated?
  • What is the specific gravity (SG) of nitrogen dioxide (NO2)?
  • What is the maximum percentage of moisture that coal dust can retain?
  • What condition is necessary for miners to safely ride conveyor belts?
  • How many days are allowed to produce employee records upon request by MHST?
  • What lifeline signal indicates distress?
  • What shall be provided on all underground (UG) belts?
  • What causes stinkdamp?
  • How is the formation of nitrogen dioxide closely connected to explosive materials?
  • What percentage of Carbon Monoxide will produce discomfort in 2-3 hours?
  • How should the deck of locomotives be protected from loose material in the track entry?
  • In which direction is the maximum force of an explosion exerted?
  • Which type of gloves should not be worn around equipment?
  • What is the required scale range for mine maps?
  • What type of devices should be provided for cutting machine drums?
  • What is meant by "immediate supervision" for an apprentice electrician?
  • What is the lifeline signal for retreat?
  • Which precaution is vital when back-poling is permitted?
  • What is the principal cause of ignition of explosive mixtures?
  • What is the purpose of rail bonding?
  • What is the effect of a short circuit on the quantity of air if fan speed is held constant?
  • When must mine operators review pillaring plans with personnel before starting work?
  • About how much air does the average person require per hour when at rest within a barricaded area?
  • What distance should 2-way communication facilities be from the mine portal?
  • What are the primary causes of haulage accidents?
  • How frequently must outlets with valves be located along water lines in haulageways?
  • How can compressed air assist within a barricade?
  • When a fan stops and ventilation is restored within 15 minutes, what should happen next?
  • What defines a working place in a coal mine?
  • What is the lowest ignition temperature of methane?
  • What can happen if the charge is separated by drillings left in the hole?
  • What shall be provided where miners load or unload from conveyor belts?
  • How shall cable couplers be constructed?
  • What would continued high oxygen content in a sealed fire area indicate?
  • Which of the following is a key factor in preventing accidents in haulage systems?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy